Checking System, Printer, And Share Status; Checking Modem And Fax Status - Multitech FaxFinder FF440 Administrator's Manual

Checking System, Printer, and Share Status

System status provides information you can use to confirm correct settings or help with diagnostics.
●
Click Status & Logs. The System Status page appears.
Field
System Status
Current Time
Up Time
Time Server Status
Printer Status
Printer Status
Network Share Status
Network Share Status Current status of any network shares set up in System Configuration | Shares.

Checking Modem and Fax Status

Use the Fax Status page to view the current state for each modem. It includes the status of any inbound or
outbound faxes. Users can abort outbound faxes. Administrators can also reset busy modems and block
inbound or outbound faxes from a modem.
To view a modem current condition or fax status:
●
Click Status & Logs | Fax Status.
Field
Modem Status
Modem The sequential modem number associated with each internal modem based on the
FaxFinder model (1-2 for the FF240, 1-4 for the FF440 and 1-8 for the FF840).
State The current modem state: Waiting for Ring, Connected, and Busied Out.
Page The page that a modem is currently transmitting, if any.
Vertical The resolution used to transmit the page. Vertical scan line types include fine and standard.
Resolution
Baud Rate The modem's current baud rate.
Width The current width setting for faxes sent through the listed modem.
Length The current length setting for faxes sent through the listed modem.
Connect When the current connection was made.
Time
Elapsed Time The time that has passed since the current connection was made.
Remote ID The identification received from the remote connection.
FaxFinder x40 Administrator Guide
The FaxFinder's current time and date. To change the date and time format go to
System Configuration |Time. Refer to
The total time the FaxFinder has been operating since the last reboot/reset.
This is the status of the time server currently in use. It also shows error messages.
Status
Disabled
Synchronizing
Synchronized at
[date/time], offset ±nn
seconds
Failed to synchronize:
[error]
Current status of each printer set up in System Configuration | Printers.
Description
Setting Time
Time server likely set to None.
FaxFinder is currently synchronizing with the time server.
FaxFinder last synchronized with the time server at the
specified date and time. The offset, if any, indicates how
much FaxFinder adjusted its time.
Time synchronization failed due to the error shown.
Description
Chapter 4 – Fax Management
for details.
Description
31