Faxfinder 840; Faxfinder Connector Descriptions; Led Descriptions - Multitech FaxFinder FF440 Administrator's Manual

Chapter 2 – Hardware and Installation

FaxFinder 840

FaxFinder Connector Descriptions

Label
1-8 PSTN/POTS RJ 11 phone line ports. The FaxFinder 240 has ports 1-2, the FaxFinder 440 has
ports 1-4, and the FaxFinder 840 has ports 1-8. Ports on the back line up with the modem
LEDs on the front.
+12V Power receptacle for provided power cord.
CONSOLE DE-9 connection for serial access and control of the FaxFinder.
USB Not used at this time.
RESET Use to reboot the FaxFinder.
LAN 1 RJ 45 receptacle for network connection.

LED Descriptions

Label Name
Speed Speed
Link/Act Link / Activity
HDD High Density
Drive
Power Power
One set of the following for each modem/port:
TD Transmit Data
RD Receive Data
CD Carrier Detect
14
FaxFinder 840 Connectors
FaxFinder 840 LEDs
When lit, if the color is:
Green: Ethernet rate is 1000 Mbps
Yellow: Ethernet rate is 100 Mbps
Unlit: Ethernet rate is 10 Mbps
Lit when a physical link has been established with the Ethernet network.
Blinking when there is activity.
When the internal hard drive is accessed, this LED will light yellow. When unlit,
HDD is not being accessed.
Solid (constant) green if unit is on.
The TD LED flashes when the modem is transmitting data to another modem.
The RD LED flashes when the modem is receiving data from another modem.
Carrier of remote modem is detected.
Description
Description
FaxFinder x40 Administrator Guide