Sas/Sata Backplane Layout - Intel SR1500 - AXXMINIDIMM DDR-2 RAID Controller Cache Memory Manual
Server chassis/server system
Hide thumbs
Also See for SR1500 - AXXMINIDIMM DDR-2 RAID Controller Cache Memory:
- Manual (104 pages) ,
- Spares/parts list and configuration manual (27 pages) ,
- Hardware installation manual (16 pages)
Table of Contents
Advertisement
Intel® Server System SR2500AL
•
Card edge connectors for most interconnects, including:
o Mid-plane
o Control Panel
o Slim-line IDE Optical Drive
•
Temperature Sensor
•
FRU EEPROM
•
One 2x4-pin Power Connector
6.5.1
SAS/SATA Backplane Layout
The hot-swap backplane installs on the back side of the hot-swap drive bay inside the chassis.
Alignment features on the chassis and backplane assembly make for easy tool-less installation.
The following diagram shows the layout of components and connectors found on the board.
Figure 37. Hot-swap SAS/SATA Backplane (Front Side View)
A
Slim-line Optical Drive Connector
B
Slim-line USB Floppy Connector
Revision – 1.6
A
B
Intel order number D31980-009
5BPeripheral and Hard Drive Sub-System
C
D
AF000045
C
Control Panel Connector
D
SAS/SATA Hot Swap Connectors
53
Advertisement
Table of Contents
