Table of Contents
Advertisement
4.3.4.1 Calling up and operating the Job wizard.
• Apply settings >>> page 77
Load setup
The Setup dialog is the first dialog that appears after calling up the Job wizard. If you do not
want to load a setup, click Next to go to the next dialog.
Proceed as follows:
1.
Click on the "Display available setups" checkbox.
2.
Select the appropriate setup name from the "Available setups" list.
3.
Click on
The print parameters saved in the selected setup are loaded into the wizard.
Save settings in the setup
You can save the settings that you made with the Job wizard in a new setup. The
associated menu appears as the final dialog in the Job wizard:
Proceed as follows:
1.
Click on the "Create new setup" checkbox.
2.
Enter a new name in the input field.
78
.
A29246-X17-X-4-7680 / do405.fm
Advertisement
Table of Contents
