Table of Contents
Advertisement
5.9.1 Preparing the Trolley
The trolley is equipped with two adjustable stoppers - one on the right and one one the left
side of the trolley. You set the elevating platform of the trolley to the work height that is
required for each of the four stations using the stoppers (upper and lower developer station,
upper and lower fuser station). Labels next to the stoppers give the correct stop position for
each station.
Trays
There are two different trays - one for the developer station and one (fireproof) for the fuser
station.
Important
When replacing the fuser station, please note
Always place the fuser station into the fireproof tray.
122
A29246-X17-X-4-7680 / do501.fm
Advertisement
Table of Contents
