Table of Contents
Advertisement
Proceed as follows:
Caution
If removed too quickly and suddenly, the developer station can be pulled out beyond
the stops and fall down. There is a danger of injury to you and of damage to the
developer station.
Always slide the developer station slowly and evenly to its stop point on the guide rail
(reference speed max. 0.5 m/s).
11.
12.
Caution
Possibility of scraping skin on sharp edges of the flange shafts.
Do not touch the flange shafts.
A29246-X17-X-4-7680 / do701.fm
7.3.10 Replace photoconductor drum
Raise the handle and pull out the
developer station slowly and evenly.
Hook the retaining plate over the upper
bolt.
273
Advertisement
Table of Contents
