Table of Contents
Advertisement
8.3.4.1 Setting the Predecurler
Proceed as follows:
3.
4.
Paper direction
5.
Determine the setting for the noted curl using the table in 8.3.4.2 Setting for
Predecurler.
6.
On the operator panel, select the <VarioPrint> <Configuration> <Paper> menu.
7.
Click on the <Paper selection> tab. Select the paper to be used for the print job or,
if required, create a new one at
320
Side to be printed
Hold the sheet between your thumb
and index finger in the center of the
front short side.
Hold the sheet to the line on the curl
measurement sheet (see paper
specification, appendix A), determine
the curl value and make a note of it.
Note whether the paper rolls to the
side that is first printed (+ curl
) or away from it (- curl
).
A29246-X17-X-4-7680 / do805.fm
Advertisement
Table of Contents
