Table of Contents
Advertisement
8.3.3 Setting the decurler
8.3.3 Setting the decurler
Curling of the paper can impair paper transport and stacking performance. Decurlers
remove these troublesome curls.
The upper and lower print units each have a decurler.
A test for each type of paper must be run in order to determine the correct decurler settings.
The decurler settings for the test print are listed in the following table.
Print mode
Fast Simplex
Duplex
CustomTone Simplex
CustomTone Duplex
8.3.3.1 Print test pages
Proceed as follows:
1.
Press the <Stop> button.
2.
On the operator panel, select the <VarioPrint> <Configuration> <Printing
parameters> <Printing mode> menu.
3.
In the "Output direction" field select:
"Front page down".
Press the <Apply> button.
4.
Open the center doors.
5.
Select the values for the decurler settings from the above table for the appropriate
print mode.
314
Decurler settings for test print
Lower print unit
0
-1
+1
+1
Upper print unit
0
+1
0
0
A29246-X17-X-4-7680 / do805.fm
Advertisement
Table of Contents
