Oce VarioPrint 5000 Operating Manual page 139

Proceed as follows:
8.
9.
A29246-X17-X-4-7680 / do501.fm
5.9.2.1 Removing fuser station
Push the trolley beneath the fuser
station so that the stopper plate is
touching the printing system.
Align trolley in such a way that the tray
on the elevating platform is aligned
dead center with the fuser station.
This guarantees that the tray does not
abut against anything when it is being
raised.
Push foot pedal down, and raise the
elevating platform, using the handle,
until it touches the stoppers. The fuser
station should be completely in the
tray.
129