Table of Contents
Advertisement
5.9.3.1 Remove developer station
Proceed as follows:
8.
9.
142
Push the trolley beneath the developer
station so that the stopper plate is
touching the printing system.
Align trolley in such a way that the cup
on the elevating platform is aligned
dead center with the developer
station. This guarantees that the tray
does not abut against anything when it
is being raised.
Push foot pedal down, and raise the
elevating platform, using the handle,
until it touches the upper and/or lower
stoppers.
A29246-X17-X-4-7680 / do501.fm
Advertisement
Table of Contents
