Table of Contents
Advertisement
Proceed as follows:
3.
4.
A29246-X17-X-4-7680 / do501.fm
5.9.3.3 Install developer station
Push the trolley in front of the
developer station bay so that the
stopper plate is touching the printing
system.
Adjust the lateral position of the trolley
to bring the telescopic rails on the
developer station into line with the
guide rails on the printing system.
Push the left guide rail on the printing
system onto the telescopic rail on the
developer station. The catch must
engage hearably. Then push the right
guide rail on the printing system into
the telescopic rail. It must also engage
hearably.
149
Advertisement
Table of Contents
