Oce VarioPrint 5000 Operating Manual page 146

5.9.2.3 Installing fuser station
Proceed as follows:
2.
3.
136
Push the trolley in front of the fuser
station bay so that the stopper plate is
touching the printing system.
Adjust the lateral position of the trolley
to bring the telescopic rails on the fuser
station into line with the guide rails on
the printing system.
Push the left guide rail on the printing
system onto the telescopic rail on the
fuser station. The catch must engage
audibly. Then push the right guide rail
on the printing system into the
telescopic rail. It must also engage
hearably.
A29246-X17-X-4-7680 / do501.fm