Table of Contents
Advertisement
Horizontal passer shift
Note
The measurements and settings must be carried out separately for leading and
trailing edge.
Proceed as follows:
1.
Select the <VarioPrint> <Configuration> <Paper> <Papers> menu at the operator
panel.
2.
Select the tab <Shrinkage compensation>.
3.
Select the page for which the setting needs to be done using the buttons in the
"Switch page" area.
4.
Enter the passer shift into the input field in the "Horizontal passer shift" area.
If the shift varies within a page, enter the average value.
5.
Click <Apply>.
The print object that is printed with the upper print unit, is horizontally shifted by the
entered value.
A29246-X17-X-4-7680 / do501.fm
5.9.6 Calculation and input of shrinkage compensation
157
Advertisement
Table of Contents
