DigiDesign D-Command Manual page 83

Utility Switch
Utility switch
The Utility switch places the D-Command in Utility mode.
When D-Command is in Utility mode, this switch flashes.
Utility mode lets you view D-Command system information,
name D-Command units, run D-Command diagnostic tests,
and set certain D-Command hardware preferences. For com-
plete information on Utility mode, see Appendix A, "Utility
Mode"
Track Size Switches
Track Size Up
switch
Track Size Down
switch
Track Size controls
The Track Size Up and Down switches increase and decrease
the track height of all tracks where a selection or edit cursor is
present.
Chapter 9: Management Sections 77