DigiDesign D-Command Manual page 105

Do one of the following:
3
• In the Custom Fader channels, touch any rotary encoder
that you want to map to the selected channel's fader.
– or –
• In the Custom Fader channels, press any switch that you
want to map to the selected channel's Mute switch.
The mapped control appears on the selected channel's fader.
Plug-In parameter mapping is remembered for that plug-in,
and is usable on any channel where it occurs.
To bypass mapping (Plug-In mode):
Press the lit Map switch. Even when it is not displayed,
■
mapping is remembered for each plug-in.
To recall mapping (Plug-In mode):
Focus the plug-in in the Focus Channel section.
1
Recall the plug-in by pressing the Plug-In switch in the Cus-
2
tom Faders section.
Press the Map switch.
3
To clear mapping (Plug-In mode):
Focus the plug-in in the Focus Channel section.
1
Recall the plug-in by pressing the Plug-In switch in the Cus-
2
tom Faders section.
Press the Map switch.
3
Press and hold the Set to Default and Do to All switches.
4
Press the channel Select switch on any custom fader chan-
5
nel.
Exporting and Importing .pim Files
To export plug-in mapping:
Press the Operation Console Prefs Soft Keys switch twice to
1
view the second page of Soft Key functions.
Press the Soft Key that corresponds to "Export PIMaps."
2
Enter a name for the Plug-In Map (.pim) file, choose a loca-
3
tion, and click Save.
Press the Operation Soft Key twice to exit.
4
To import plug-in mapping:
Press the Operation Console Prefs Soft Keys switch twice to
1
view the second page of Soft Key functions.
Press the Soft Key that corresponds to "Import PIMaps."
2
Locate the plug-in mapping (.pim) file you want to use and
3
click Import.
Press the Operation Soft Key twice to exit.
4
Chapter 11: Operating Modes 99