Auto Function (Auto Pan, Etc) - Panasonic WJ-HD309 Operating Instructions Manual

Note: To move the camera to another registered preset
position, press the SET button after selecting a desired
preset position number in step 2. The PRESET/AUTO
PAN window will not close and it is possible to select
another preset number.

■ Auto Function (Auto Pan, etc)

Moves a camera with an auto function set in advance.
Important:
When the monitor 1 is selected, it is impossible to move
a camera with an auto function by performing the fol-
lowing steps.
In this case, perform the settings using the setup menu
of camera.
MONITOR1
MONITOR2
R 1 2 3
R
SHIFT SEQ OSD
5 6 7
DISK SELECT COPY TEXT MARK
9 10/0
11
1
EL-ZOOM LOGOUT LOGOUT
2 13 14 15
z
Press the PRESET/AUTO button.
The PRESET/AUTO indicator will light and the PRESET/
AUTO PAN window will be displayed.
x
Move the cursor to "AUTO PAN" using the
arrows button and check the radio button next
to "AUTO PAN" using the jog dial.
PRESET / AUTO PAN
PRESET
PRESET NUMBER
AUTO PAN
c
Select "OK" using the arrows button and press
the SET button.
The PRESET/AUTO PAN window will be closed and auto
function will start.
During auto action, it is impossible to register a preset posi-
tion. To close the PRESET/AUTO PAN window, select "CAN-
CEL" using the arrows button and press the SET button.
The setting will be canceled and the PRESET/AUTO PAN
window will be closed.
44
STOP PLAY PAUSE REC - REC STOP
REV
4
PAN/ GOTO
SEARCH
TILT LAST
SETUP
PAN/TILT
8 /ESC
SLOW
ZOOM/ A-B
FOCUS REPEAT
–
12
IRIS LISTED
PRESET
/AUTO
16
SET
BUSY
z xc c
32
OK CANCEL
FWD
+
316
x