Panasonic WJ-HD309 Operating Instructions Manual page 98

• [Audio Allocation]
Allocates audio from the audio input connectors (1 - 4)
on the rear panel of the unit to camera channels.
Allocate audio in accordance with channels of connect-
ed cameras. When OFF is selected, audio will not be
heard.
Important:
• When a live image from the audio assigned camera
channel is displayed on a single screen on monitor 2,
audio will be heard. When displaying on a multi-screen,
audio will not be heard.
• When images from the audio assigned camera channel
are displayed on a single screen, recorded audio will
be heard. When displaying on a multi-screen, recorded
audio will not be heard.
• Audio will be recorded regardless of whether you are
displaying on a single screen or a multi-screen.
• Audio may be recorded fragmentary occasionally.
w
[Emergency REC] Perform the settings for
emergency recording
Perform the settings for emergency recording such as
the recording time or recording rate for emergency
recording.
Refer to page 21 for further information about emer-
gency recording.
SETUP MENU
REC Setup
Emergency REC
• [Resolution]
Select a recording resolution from the following.
FRAME 3D ON: High resolution (720 x 480), with cam-
era shake compensation
FRAME 3D OFF: High resolution (720 x 480)
FIELD: Standard resolution (720 x 240)
SIF: Low resolution (360 x 240)
Important:
• It is recommended to set same value for the resolution
of emergency recording as the resolution of manual
recording, event recording and schedule recording.
• Recording will not be performed for around 4 seconds
from the beginning of emergency recording when the
resolution is switched.
98
Maintenance Recording Event Schedule
LIVE
Switcher Display Comm System
■
Resolution FIELD
■
Recording Time 10s
■
Recording Rate and Quality
RATE Quality RATE Quality
CAM1 3ips SFA CAM9 3ips SFA
CAM2 3ips CAM10 3ips
SFA SFA
CAM3 3ips SFA CAM11 3ips SFA
CAM4 3ips SFA CAM12 3ips SFA
CAM5 3ips SFA CAM13 3ips SFA
CAM6 3ips SFA CAM14 3ips SFA
CAM7 3ips SFA CAM15 3ips SFA
SFA SFA
CAM8 3ips CAM16 3ips
■
Auto Copy OFF
• [Recording Time]
Perform the settings for the recording time and record-
ing action for emergency recording.
The following are available for the recording time.
1 s - 10 s (in 1 second intervals)
20 s/30 s
1 m - 10 m (in 1 minute intervals)
20 m/30 m/40 m/50 m/60 m
MANUAL: Recording will continue while the external
switch is being held down.
CONTINUE: Recording will not stop until the ALARM
RESET button on the front panel of the unit is
pressed.
• [Recording Rate and Quality]
Perform the settings for the recording rate and image
quality for emergency recording.
The following are available for the recording rate.
OFF/1 ips/2 ips/3 ips/5 ips/6 ips/7.5 ips/10 ips/15 ips/
30 ips/60 ips
Important:
• When OFF is selected for a specified camera channel,
images from a camera channel set to OFF will not be
recorded.
• When "FRAME 3D ON" or "FRAME 3D OFF" is selected,
the total recording rates of CAM 1 - CAM 16 (for the
WJ-HD316) must be less than 30 ips.
• When "FIELD" is selected, the total recording rates of
CAM 1 - CAM 16 (for the WJ-HD316) must be less than
60 ips.
• When "SIF" is selected, the total recording rates of CAM
1 - CAM 16 (for the WJ-HD316) must be less than
120 ips.
• When "FRAME 3D ON", "FRAME 3D OFF" or "SIF" is
selected, it is impossible to select 60 ips.
The following are available for the image quality.
SFA/SFB: Top quality (SUPER FINE)
FQA/FQB: High quality (FINE)
NQA/NQB: Standard quality (NORMAL)
EXA/EXB: Low quality (EXTENDED)
**A is suitable for less dynamic images.
**B is suitable for more dynamic images.
• [Auto Copy]
Select ON or OFF to set whether or not to automatically
copy images recorded by emergency recording onto
the copy area on the built-in hard disk or DVD-RAM
disk.
Important:
When OFF is selected for "Auto Copy" on "Basic setup"
of "System", the auto copy function will not work after
emergency recording even though ON is selected for
this setting. Select "HDD", "COPY 1" or "COPY 2" for
"Auto Copy".