Panasonic WJ-HD309 Operating Instructions Manual page 49

MONITOR1
MONITOR2
R
1 2 3 4
PAN/
R
TILT
SHIFT SEQ OSD
5 6 7 8
ZOOM/
FOCUS
DISK SELECT COPY TEXT MARK
9 10/0 12 IRIS
11
1
PRESET
EL-ZOOM LOGOUT LOGOUT
/AUTO
13 14 15 16
2
v
Select the "OK" button using the arrows button
and press the SET button.
The DATA COPY window will be closed and data copy will
start.
The copy icon will be displayed on the task bar during
copying.
To close the DATA COPY window, select "CANCEL" using
the arrows button and press the SET button. The setting will
be canceled and the DATA COPY window will be closed.
Copy icon
When the selected COPY DRIVE is not found, copying will
not start and the DATA COPY window will not be closed
even when the SET button is pressed after selecting "OK".
Important:
• To eject the disk, do the following during live images
are displayed.
<To eject the disk of COPY1>
Confirm the SHIFT indicator is lit. Then, press the cam-
era selection button [10/0] and [1] ([0] and [1] for the
WJ-HD309) simultaneously for 2 seconds or more.
<To eject the disk of COPY2>
Confirm the SHIFT indicator is lit. Then, press the cam-
era selection button [10/0] and [2] ([0] and [2] for the
WJ-HD309) simultaneously for 2 seconds or more.
• Copying will be performed in the following order:
Viewer Software → Images → Audio
Depending on the set time range for "PERIOD", some of
images and audio may not be copied.
STOP PLAY PAUSE REC - REC STOP
REV FWD
GOTO
LAST SEARCH
SETUP
PAN/TILT
SLOW /ESC
A-B
REPEAT
–
LISTED
SET
BUSY
v v
+
316
49