Error/Warnings - Panasonic WJ-HD309 Operating Instructions Manual

ERROR/WARNINGS

• The "error" status
When a fatal error (one that might cause the system to go down) has occurred, the ERROR indicator will blink red.
• The "warning" status
When an error (even though it has not caused the system trouble yet, but which may become a fatal error) has occurred,
the ERROR indicator will blink orange.
Indication
ALT-*
R-ERROR
W-ERROR
SMART
H-METER
THERMAL
POWER
#-nn% (available
disk space is run-
ning out)
#-FULL (no avail-
able disk space)
56
Status
Error Recorded image has been altered.
Playback will be paused.
Error Failed to read data from the HDD.
The HDD may be malfunctioning.
Error Failed to write data on the HDD.
Warning The hard disk may be malfunctioning
and may not work correctly.
Warning The set time for the HOUR METER has
passed. (Refer to page 93.)
It may be reaching the end of the hard
disk's lifetime.
Warning Thermal error of the unit or the optional
extension unit has been detected.
Warning The power outage alert signal is sup-
plied from the uninterruptible power sup-
ply system (UPS). Internal processing
will start when the set time for "Shutdown
Time" on the "Basic Setup" menu of
"System" has passed after having
received the power outage alert signal.
(Refer to page 120.) When the internal
processing starts, recording will stop
and all operations will be invalid.
Error The hard disk is almost full or completely
Warning full.
The DVD-RAM disk is almost full or com-
pletely full.
The CD-R or DVD-R disk is almost full or
completely full.
Description Solution
Press the ALARM RESET button to can-
cel the error status. Press the
PLAY/PAUSE button to resume play-
back.
Press the ALARM RESET button to can-
cel the error status. Contact the dealer
to replace the hard disk.
Press the ALARM RESET button to can-
cel the error status. Contact the dealer
to replace the hard disk.
Press the ALARM RESET button to can-
cel the warning status. Contact the deal-
er to replace the hard disk.
Press the ALARM RESET button to can-
cel the warning status. Contact the deal-
er to replace the hard disk.
Press the ALARM RESET button to can-
cel the warning status. If thermal errors
occur frequently, the unit may be mal-
functioning. Contact the dealer.
Press the ALARM RESET button to can-
cel the warning status. The unit will start
operation automatically after the UPS
starts power supply.
Press the ALARM RESET button to can-
cel the error or the warning status.
Initialize or replace the hard disk. (Refer
to page 127, 132.) When initialized, all
recorded data will be deleted. It is rec-
ommended to copy the data using an
external recording device.
Press the ALARM RESET button to can-
cel the error or the warning status.
Initialize the DVD-RAM disk. (Refer to
page 52.) When initialized, all recorded
data will be deleted.
Press the ALARM RESET button to can-
cel the error or the warning status.
Replace the disk with new one.