Panasonic WJ-HD309 Operating Instructions Manual page 35

MONITOR1
MONITOR2
R 1 2 3 4
PAN/
R
TILT
SHIFT SEQ OSD
5 6 7 8
ZOOM/
FOCUS
DISK SELECT COPY TEXT MARK
9 10/0 11 12 IRIS
1
PRESET
EL-ZOOM LOGOUT LOGOUT
/AUTO
2 13 14 15 16
⁄3
Move the cursor to select a detection mode
using the arrow buttons and rotate the jog dial
to check the radio button next to the selected
detection mode. Press the SET button to deter-
mine the selection.
■ VMD SEARCH
ANY AREA
MASKING DURATION
VECTOR
A 20s B 20s
DURATION
A 20s B 20s
SET : [SET] SEARCH : [PLAY]
Refer to page 36 for further information about each of the
detection modes.
<ANY AREA mode>
Move the cursor to the parameter box using the arrows but-
ton (B) to select a masking duration from the following.
1S/1M/1H/24H
<VECTOR mode>
Move the cursor to an area for the settings of VECTOR
using the arrows button (B) and rotate the jog dial to select
an area. Move the cursor to the parameter box of the
selected area using the arrows button (B) to select an
interval time for an object moving between each area from
the following.
--/5 s/10 s/20 s/30 s/40 s/50 s/1 m
<DURATION>
Move the cursor to the parameter box of each area using
the arrows button (B) and rotate the jog dial to select a
moving duration for an object in each area from the follow-
ing.
--/5 s/10 s/20 s/30 s/40 s/50 s/1 m
⁄7 ⁄4 ⁄ 6
STOP PLAY PAUSE REC - REC STOP
REV FWD
GOTO
LAST SEARCH
SETUP
PAN/TILT
/ESC
SLOW
A-B
REPEAT
–
LISTED
SET
BUSY
⁄3 ⁄3 ⁄ 4 ⁄3 ⁄ 5
24h
C 20s D
C 20s D 20s
CANCEL : [ESC]
⁄4
Press the SET button or the PLAY/PAUSE but-
ton to start searching and display the results
of the VMD search.
+
VMD SEARCH
TIME&DATE
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
316
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK
Up to 200 results will be displayed. (When 200 results are
listed, searching will stop.)
⁄5
Rotate the jog dial to select a result to be dis-
played.
VMD SEARCH
TIME&DATE
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK
⁄6
Press the PLAY/PAUSE button to start play-
back.
The LISTED indicator and the indicator on the PLAY/PAUSE
button will light and playback of the selected recording will
start.
Note: It is possible to skip the playback point to the listed
time (motion detected time) by rotating the jog dial
when the LISTED indicator is lit.
To return to normal playback, press the LISTED button.
⁄7
Press the STOP button to stop playback.
The indicator on the PLAY/PAUSE button will go off and
playback will be stopped.
Live images will be displayed on monitor 2 and the VGA
monitor.
CAM
01ch
01ch
01ch
01ch
01ch
01ch
01ch
01ch
APR.25.03*12:34:56 AM TOTAL 12345
CAM
01ch
01ch
01ch
01ch
01ch
01ch
01ch
01ch
APR.25.03*12:34:56 AM TOTAL 12345
35