Data Erase Function; Auto Erase Function - Panasonic WJ-HD500A Operating Instructions Manual

DATA ERASE FUNCTION

The Disk Recorder can erase recorded data past due either
automatically or manually.

Auto Erase Function

1. Press the SETUP/ESC button for two seconds or more,
the WJ-HD500 SETUP menu as shown below appears
on the screen of the Multiscreen Monitor.
WJ-HD500 SETUP
TIMER OFF
REC SETUP
COMMON SETUP
* MANUAL
* TIMER
* EMERGENCY
MULTIPLEXER SETUP
ALARM SETUP
DISPLAY SETUP
COMMUNICATION SETUP
SYSTEM SETUP
COPY DVD
2. Select SYSTEM SETUP in the menu by pressing the D
or C button, then press the SET button.
The SYSTEM SETUP menu as shown below will appear
on the monitor screen
9 SYSTEM SETUP
CLOCK JAN 1.00
TIME ADJUSTING
SET TIME
AUTO KEY LOCK
PASSWORD ALL
OPERATION
BUZZER
USER DEFINED SETUP
DISK MANAGEMENT
ERROR REPORT
SYSTEM INFORMATION
3. Select DISK MANAGEMENT in the menu by pressing
the D or C button, then press the SET button.
The DISK MANAGEMENT menu as shown below will
appear on the monitor screen.
9-3 DISK MANAGEMENT
DISK INFORMATION
HDD FULL
ERASE
99
2.00
WITHOUT AUDIO
WITHOUT AUDIO
WITHOUT AUDIO
0:00
OFF
0:00
OFF
*****
*****
ON
*LOAD
1%
4. Select ERASE in the menu by pressing the D or C but-
ton, then press the SET button.
The ERASE menu as shown below will appear on the
monitor screen.
9-3-2 ERASE
AUTO ERASE OFF
ERASE DATA BEFORE SEP12.00
ARE YOU SURE TO EXECUTE?
[SET]:EXECUTE
5. Move the cursor to the AUTO ERASE parameter by
pressing the D or C button, then select the storage
days on the disk by pressing the + or - button.
OFF: Disables auto erase function.
1 — 180 DAYS: The auto erase function is activated
after the set number of days has passed.
The factory default setting is OFF.
6. Press the SETUP/ESC button for two seconds or more
to close the menu and return to the normal view.
• The recorded data will be automatically erased the
storage days set in step 5 are passed.
• The data erase is executed at midnight (0:00) on
the specified day.
If the Disk Recorder is powered off at that time, the
Disk recorder will execute erase by searching stor-
age data when the Disk Recorder is powered on.
YES NO