Auto Functions (Auto Panning, Etc.) - Panasonic WJ-HD616K Operating Instructions Manual

Auto functions (Auto panning, etc.)

Activate the auto function of the camera according to the settings of the camera.
Step 1
Display the "Preset/Auto" window. (☞ Page 67)
Step 2
Move the cursor onto "Auto mode", and then select
the desired auto function by rotating the jog dial
(inside).
The following 8 auto functions can be selected.
"Auto track", "Auto pan", "Preset sequence", "Sort",
"Patrol 1, "Patrol 2", "Patrol 3", "Patrol 4"
Refer to the operating instructions of the camera for
information about each auto function.
Step 3
Move the cursor onto the [Start] button, and then
press the [SET] button.
→ The "Preset/Auto" window will close and the
selected auto function will start.
Step 4
To stop the selected auto function, press the [SET]
button after moving the cursor onto the [Stop] button.
Step 5
To close the "Preset/Auto" window, press the [SET]
button after moving the cursor onto the [Cancel] but-
ton or press the [SETUP/ESC] button on the front
panel.
69