Management Of Users/Hosts - Panasonic WJ-HD309 Operating Instructions Manual

Digital disk recorders
Hide thumbs Also See for WJ-HD309:
Table of Contents

Advertisement

MANAGEMENT OF USERS/HOSTS

It is necessary in advance to register users and PCs (hosts) who access this unit via a network such as LAN.
Up to 32 users and 8 hosts can be registered.
The following information can be registered as user information and host information.
Item
User name
Host IP address
Password
Level
Priority
Default screen
Camera partitioning
For the set items above, the unit will work differently depending on whether the unit is operated directly or operated via a net-
work as follows.
● When the unit is operated directly
Operate using the monitor connected with this unit. There are 3 ways to operate this unit as follows:
• Operate using the buttons on the front panel of the unit
• Operate using a PS·Data compatible controller
• Operate using a PC connected to the SERIAL connector (RS232C) on the rear panel of the unit
It is impossible to log in the unit simultaneously by the above ways (except for using the same user name to log in).
When a user tries to log in after other user has already logged in the unit, the unit will work as follows according to the setting
for "Priority" of "System".
Setting for "Priority"
Follow the priority
Pre-priority
Post-priority
64
Description
Name of user who log in this unit. Enter this in
the login window.
IP address of a PC that accesses this unit.
Only PCs with registered IP addresses can
access this unit if ON is selected for "Host
Authentication" and OFF is selected for "User
Authentication".
Password of user who log in this unit. Enter this
in the login window.
Level of users or hosts for operable functions.
Refer to page 125 for further information.
Priority of controllable functions. When two or
more users/hosts performed the same opera-
tion, only a user/host with the highest priority
can perform the operation.
Startup display to be displayed on the monitor
1, monitor 2 and the VGA monitor after login.
Controllable range for each camera channel.
Note
Item to be set only for user registration
Item to be set only for host registration
Item to be set only for user registration
Determine the priority in the following cases:
• A user tries to log in after other user has
already logged in.
• A user tries to control a camera that is being
controlled by other user.
Description
When a user's priority is higher than the one of the other user
who has already logged in, this user can log in and other
user who has already logged in will be forced to log out.
When a user's priority is lower than the one of the other user
who has already logged in, this user cannot log in.
When other user has already logged in, any user except
administrators cannot log in regardless of priority.
When an administrator logged in, the other user who has
already logged in will be forced to log out.
Any user can log in regardless of priority.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wj-hd316

Table of Contents