Major Operating Controls And Their Functions; Front View - Panasonic WJ-HD309 Operating Instructions Manual

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

■ Front View

[WJ-HD316]
[WJ-HD309]
q Operate Indicator (OPERATE)
Lights up when the power is turned on.
w Alarm Suspension Indicator (ALARM SUSPEND)
Lights up when the alarm suspension mode is selected.
e Alarm Indicator (ALARM)
Blinks when an alarm occurs, and lights steadily when
the activated alarm is reset automatically.
To turn this indicator off, press the ALARM RESET but-
ton.
r Alarm Reset Button (ALARM RESET)
Pressing this button cancels alarm activation, and
returns the system to the condition before the alarm
was activated.
t Error indicator (ERROR)
Blinks orange when an error occurs that will not keep
the unit from running.
Blinks red when an error occurs that may cause the
system to go down.
Refer to page 56 for further information about error/
warnings.
y Timer Indicator (TIMER)
Lights up when the schedule recording is set, and
blinks while the schedule recording is being performed.
8
o
t
qw e r yu i !0
MONITOR1
MONITOR2
TIMER 1 2
ERROR
ALARM
SHIFT
5 6
ALARM
SUSPEND ALARM
RESET
DISK SELECT COPY
9 10/0
HDD 1
EL-ZOOM
OPERATE
13 14
HDD 2
o
t
qw e r yu i !0
MONITOR1
MONITOR2
TIMER 1 2
ERROR
ALARM
SHIFT SEQ TEXT
4 5
ALARM
SUSPEND
ALARM
RESET
DISK SELECT COPY
7 8
HDD 1
EL-ZOOM
OPERATE
0
HDD 2
!8 !9 @0
!1 !5 !6 !7
STOP PLAY PAUSE REC - REC STOP
REV
3 4
PAN/ GOTO
TILT LAST
SEARCH
SEQ OSD
PAN/TILT SETUP
7 8
ZOOM/ A-B SLOW /ESC
FOCUS REPEAT –
TEXT MARK
11 12
IRIS LISTED
LOGOUT PRESET
/AUTO
15 16
SET
BUSY
!2 !3 !4 @1 @2 @3
!8 !9 @0
!1 !5 !6 !7
STOP PLAY PAUSE REC - REC STOP
REV
3
PAN/ GOTO
TILT LAST SEARCH
OSD
SETUP
PAN/TILT
6
SLOW /ESC
ZOOM/ A-B
–
FOCUS REPEAT
MARK
9
IRIS LISTED
PRESET
LOGOUT
/AUTO
SET
BUSY
!2 !3 !4 @1 @2 @3
u HDD Access Indicators (HDD1/HDD2)
Blinks when the HDD1 or the HDD2 is accessed
respectively.
i Monitor Switch button (MONITOR1/MONITOR2)
Pressing this button switches the monitor. This button
lights up when monitor 1 is selected, and goes off when
monitor 2 or the VGA monitor is selected.
o Shift Button (SHIFT)
Toggles the functions of the camera selection buttons.
!0 Camera Selection Buttons ([1] - [10/0], [11] - [16] for
the WJ-HD316, [1] - [9], [0] for the WJ-HD309)
Pressing a button displays live or playback images of
the selected camera. The LED in the button indicates
the status as follows.
Green: When a button is lit green, the currently dis-
played image on the monitor is live from a respec-
tive camera.
Orange: When a button is lit orange, the image from a
respective camera is recorded.
Blue: When a button is lit blue, the currently displayed
image on the monitor is live from a respective cam-
era and is also recorded.
@6
PULL
FWD
+
Digital Disk Recorder
WJ-HD
@4 @5
@6
PULL
FWD
+
Digital Disk Recorder
WJ-HD
@4 @5
@7 @8 @9
S-VIDEO
VIDEO
COPY 2
OUT
AUDIO
OUT
#0
@7 @8 @9
S-VIDEO
VIDEO
COPY 2
OUT
AUDIO
OUT
#0