Panasonic WJ-HD309 Operating Instructions Manual page 158

Problem
Cannot start recording.
Cannot record the SETUP
MENU of a matrix switcher
Cannot playback images.
Cannot control cameras.
158
Check item/Remedy
• Check if the HDD has an available disk space.
• Check if the recording setup is set to ON.
• Check the schedule settings.
• Check the recording priority settings.
• When the setting menu is displayed by non-interlace sig-
nal, the setting menu may be unable to function normally.
Since the setting menu of the matrix switcher is displayed
by non-interlace signal, recording or displaying with this
unit may be impossible.
• Check if images have been recorded in the HDD.
• Check the level settings of users logging in. Can the users
record images?
• Check the level settings of users logging in. Can the users
display camera images on monitors?
• Check the connection of camera you are going to control.
Coaxial communication control is available for cameras
connected to VIDEO IN 1 to 8 for WJ-HD316 (1 to 6 for
the WJ-HD309).
• Check if the camera you are going to control is a combina-
tion camera.
• Check the camera control settings.
• Check the level settings of users logging in. Can the users
control cameras?
• Check the BUSY indicator. When the indicator is lighting,
a higher-priority user is controlling cameras. You cannot
control cameras until the indicator goes out.
Page
Refer to p. 94.
Refer to p. 97.
Refer to p. 104.
Refer to p. 97.
–
Refer to p. 28.
Refer to p. 122
and 124.
Refer to p. 122
and 124.
Refer to p. 69.
Refer to p. 69.
Refer to p. 115.
Refer to p. 122
and 124.
Refer to p. 9.