On The Monitor 2 (To Display Live Or Recorded Image) - Panasonic WJ-HD309 Operating Instructions Manual

Digital disk recorders
Hide thumbs Also See for WJ-HD309:
Table of Contents

Advertisement

■ On the Monitor 2 (To display live
or recorded image)
q
w
B
q
Notes:
• Same images displayed on monitor 2 will be displayed
on the VGA monitor.
• The camera title will be displayed with 16 characters (2
lines: 8 characters per line).
Important:
• Since the VGA output from this unit is the same as for
televisions (720 H x 480 V pixels/vertical frequency of
59.94 Hz), it may be possible that both the left and right
edges can not be fit onto the screen depending on the
VGA monitor.
• It is impossible to use the MONITOR (VGA) connector
when connecting the unit in the cascade connection.
• It may take time to display live image on the VGA moni-
tor if the VGA monitor is turned on/off during the unit is
running.
1. Camera Title
Displays the edited camera title.
A position to display a camera title can be selected
from the following.
Upper left, upper right, lower left, lower right, center
The default camera title position is lower right (R-
LOWER).
2. Task Bar
Displays the current status.
The task bar consists of the main bar (w - A), the left
bar (w - B), and the right bar (w - C).
There are 3 different ways to display the task bar as fol-
lows.
12
q
w
q
C
q
w – A
Mode 1
Displays only the main bar and the status is displayed
on it.
Mode 2
Displays the status on the main bar, the left bar and the
right bar.
Mode 3
Displays the status only on the main bar, and does not
display information on the left bar and the right bar.
Note: Mode 2 and Mode 3 are graphic images. They
may not be as clear as Mode 1.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wj-hd316

Table of Contents