Troubleshooting - Panasonic WJ-HD309 Operating Instructions Manual

TROUBLESHOOTING

Check to see the following before request for repair.
Contact your dealer if a trouble cannot be solved even after checking and trying solution.
Problem
Power is not turned on.
The HDD SAFETY MODE win-
dow is displayed after turning
on the power of the unit.
No camera image is displayed
on MON 1, MON 2, and the
VGA monitor
The log-in menu does not
appear even if you press the
button of the unit.
The camera image is dim.
Cannot open SETUP MENU.
Check item/Remedy
• Check if the power plug is surely connected to the AC out-
let.
• Check if the power cord is surely inserted into the power
socket of the unit.
• The HDD SAFETY MODE is set to ON.
In this case, set the HDD SAFETY MODE to OFF.
• Check if the lens covers of the cameras have been
removed.
• Check if the power is supplied to cameras and connected
devices.
• Check if the cable connections are correct.
• Check the brightness and contrast settings of monitors.
• Can the users display camera images on monitors?
Check the level settings of users logging in.
• Check if no user has logged in with the system controller.
• Check if dust may not be sticking on the camera lens.
• Check the level settings of users logging in. Can the users
display SETUP MENU on monitors?
• Check if the monitor 1 is used to display the SETUP
MENU. The SETUP MENU cannot be displayed on the
monitor 1.
Page
–
–
Refer to p. 67.
–
–
Refer to p. 69.
–
Refer to p. 122
and 124.
–
–
Refer to p. 122
and 124.
Refer to page
11.
157