Time Format - Panasonic WJ-HD309 Operating Instructions Manual

● Auto Copy
ON or OFF whether or not to copy recorded images to the
copy area on the hard disk automatically.
OFF: Does not copy automatically.
ON: Copies recorded images to the copy area on the hard
disk of this unit.
Important:
• When OFF is selected, the auto copy function at an
event occurrence and emergency recording will not
function.
• The auto copy will not work if a DVD-RAM disk drive is
not connected even though "COPY 1" or "COPY 2" is
selected.
• Images recorded (by event pre-recording) in the pre-
recording area on the hard disk will not be copied auto-
matically.
w
[Time & Date] Setting of the date and time
Perform the following settings of the time and date.
SETUP MENU
Maintenance Recording
Switcher Display
■
Date Format
Basic Setup
■

Time Format

Time & Date
■
Time & Date
User Regist. JAN . 01
User Edit
■
Auto Adjust Time
User Delete
Master Time
Host Regist.
■
Summer Time(Day Light Saving)
■
Host Edit Summer Time(Day Light Saving)Table
Host Delete
User Level
Save/Load
● Date Format
Select a display format for the date from the following. (Ex.
April 1, 2003)
YY.MM.DD: 03.4.1
MMM.DD.YY: APR.1.03
DD.MMM.YY: 1.APR.03
● Time Format
Select a display format for the time from the following. (Ex.
3 o' clock just in the afternoon)
12h: 3:00:00 PM
24h: 15:00:00
● Time Setup
Adjust the current time and date.
Enter year, month, day, hour, minute and second in order,
move the cursor to "SET" and press the SET button.
Important:
Recording will stop for around 4 seconds just after set-
ting date and time.
Event Schedule
LIVE
Comm System
MMM.DD.YY
12H
: :
. 03 12 00 00 AM
SET
OFF
12 :00 AM
AUTO
SETUP
● Auto Adjust Time
Select a method for auto time adjustment from the follow-
ing.
When "MASTER" is selected, a signal will be supplied from
the ALARM/CONTROL connector as the MASTER time (see
below) at the specified time.
OFF: Does not function.
MASTER: A signal will be supplied from the ALARM/CON-
TROL connector on the rear and the clock of other
devices will be adjusted with reference to the time of
this unit.
SLAVE: A signal will be supplied to the ALARM/CONTROL
connector on the rear and clock of this unit will be
adjusted.
Important:
Recording will not be performed for around 4 seconds
when changing the present time (accurate within ±5
seconds) using the time adjustment input (pin no.20) of
the ALARM/CONTROL connector on the rear panel.
● Master Time
Specify the time when supplying a signal from the
ALARM/CONTROL connector.
● Summer Time (Day Light Saving)
Select the way of switching the summer time from the fol-
lowing.
OFF: Does not function.
ON: Applies summer time.
AUTO: Applies summer time in accordance with the setting
of the summer time (see next page).
● Summer Time (Day Light Saving) Table
Do the following to specify the start time & date and the end
time & date of summer time.
[Screenshot 1]
Start operation from the "Time & Date" menu.
SETUP MENU
Maintenance Recording
Switcher Display
■
Date Format
Basic Setup
■
Time Format
Time & Date
■
Time & Date
User Regist. JAN . 01
User Edit
■
Auto Adjust Time
User Delete
Master Time
Host Regist.
■
Summer Time(Day Light Saving)
■
Host Edit
Summer Time(Day Light Saving)Table
Host Delete
User Level
Save/Load
z Move the cursor to "Summer Time (Day Light Saving)
Table" using the arrows button (C D) and press the
SET button.
Event Schedule
LIVE
Comm System
MMM.DD.YY
12H
. 03 12 : 00 : 00 AM
SET
OFF
12 :00 AM
AUTO
SETUP
121