Printing A Status Sheet; Setting The Alert Value Of The Paper - Epson Stylus Pro 7450 User Manual

Printing a status sheet

While in Menu mode, you can print a status sheet to see the
current default values. To print a status sheet, follow the steps
below.
1. Make sure that paper is loaded in the printer.
2. Press the Menu r button to enter Menu mode.
3. Press the Paper Feed d button or Paper Feed u button to
display TEST PRINT, and then press the Menu r button.
4. Press the Paper Feed d button or Paper Feed u button to
display STATUS SHEET, and then press the Menu r button.
5. Press the Enter
After printing is finished, follow the message on the LCD
panel to return to the READY state.

Setting the alert value of the paper

You can get a message when there is not much roll paper left, by
setting the alert value using the steps below.
Note:
This setting is available only when you select ROLL for REMAINING
PPR SETUP in Maintenance mode. See "REMAINING PPR SETUP"
on page 197 for details.
1. Press the Menu r button to enter Menu mode.
2. Press the Paper Feed d button or Paper Feed u button to
display PRINTER SETUP, and then press the Menu r button.
button again to start printing a status sheet.
The Control Panel
192