Epson Stylus Pro 7450 User Manual page 238

2. Put the lower shafts down in the forward position as shown,
so that they rest on the floor.
When feeding paper backward
Note:
❏ When feeding roll paper larger than the B0 size backward, make sure
that your printer has at least 30 cm (12 inches) of space to its rear.
This prevents the printed paper edges from folding.
❏ When you feed paper backward, remove the flange from the drive
unit and fully slide the movable unit to the left side of the printer;
otherwise, the printed paper may conflict with the Auto Take-up
Reel Unit and a paper feed error may occur.
Paper Handling
238