Table of Contents
Advertisement
PAPER CUT ERROR
REMOVE UNCUT
PAPER
COMMAND
ERROR
CHECK DRIVER
SETTINGS
Paper is not cut correctly
when Roll Auto Cut On
is selected.
Damaged data is sent to
the printer.
The printer receives data
with a wrong command.
The installed printer
driver is not correct for
the printer.
Release the paper
lever, and then remove
the uncut paper.
Finally, set the paper
lever to the secured
position.
The paper cutter may
not be installed
correctly. See
"Replacing the Paper
Cutter" on page 261.
Paper cutter may be
blunt. Replace the
paper cutter. See
"Replacing the Paper
Cutter" on page 261.
Stop printing, and then
press the Pause button
for 3 seconds.
Stop printing, and then
press the Pause button
for 3 seconds. Finally,
make sure that the
installed printer driver is
correct for the printer.
Problem Solver
287
Advertisement
Table of Contents
Troubleshooting
