Epson Stylus Pro 7450 User Manual page 296

For Windows 2000
1. Click the Start button, point to Settings and select Printers.
2. Right-click EPSON Stylus Pro XXXX.
3. Select Set As Default, then close the Printers window.
For Mac OS X
Make sure that the printer driver Stylus Pro XXXX is correctly
added to the Print Center (for Mac OS X 10.2.x) or Printer Setup
Utility (for Mac OS X 10.3.x or later), and the correct one is selected
in the Print Center or the Printer Setup Utility.
Printer port setting does not match the printer connection
port (for Windows only)
To select the printer port, follow the steps below.
For Windows XP
1. Click Start, click Control Panel, click Printers and Other
Hardware, and then click Printers and Faxes.
2. Right-click EPSON Stylus Pro XXXX, then select Properties.
3. Click the Ports tab.
4. Make sure that your printer port is selected.
For Windows Vista
1. Click
and then click Printers.
2. Right-click EPSON Stylus Pro XXXX, then select Properties.
3. Click the Ports tab.
, click Control Panel, click Hardware and Sound,
Problem Solver
296