Epson Stylus Pro 7450 User Manual page 173

THICKNESS PATTERN
You can print the paper thickness detection pattern. If you select
STANDARD in PAPER NUMBER, the pattern is not printed.
THICKNESS NUMBER
Check the paper thickness detection pattern, and then enter the
number for the print pattern with the smallest gap.
CUT METHOD
You can specify a cutting method: STANDARD, THIN PAPER, THICK
PAPER, FAST, or THICK PAPER, SLOW.
PAPER FEED ADJUST
You can set the paper feed amount. The range is -0.70 to 0.70%.
DRYING TIME
You can set the ink drying time for each print head pass. The range
is 0 to 10 seconds.
PAPER SUCTION
You can set the suction pressure used to feed the printed-paper.
Select STANDARD, -1, -2, -3, or -4.
M/W ADJUSTMENT
You can adjust the MicroWeave mode. The setting range is
STANDARD, 1 and 2. Increase the value to give priority to the print
speed, or decrease it to give priority to the print quality.
The Control Panel
173