Cutting The Roll Paper Or Printing Page Lines - Epson Stylus Pro 7450 User Manual

Hide thumbs Also See for Stylus Pro 7450:
Table of Contents

Advertisement

Cutting the roll paper or printing page lines

When your print job is finished, the printer cuts the roll paper
automatically or prints page lines around the printed data
according to your settings. You can make these settings using the
control panel or printer software.
Note:
❏ Printer driver settings usually override the control panel settings.
Use your printer driver settings whenever possible.
❏ When the printer cuts the printout, it may take a little time to
proceed with cutting after printing is finished.
Cutting the roll paper automatically
To cut the roll paper automatically after printing, follow the steps
below.
1. Before printing, press the Paper Source l button to select
Roll Auto Cut On
2. Print your data.
To make the auto cut setting using the printer driver, see "Roll
paper cut for borderless printing" on page 97.
Cutting the roll paper manually
To cut printouts manually, follow the steps below.
1. Press the Paper Source l button to select Roll Auto Cut Off
.
2. Press the Enter
3. The printer automatically feeds the paper to the cutter guide,
and then the printer becomes offline. Pause appears on the
LCD panel.
.
button.
Paper Handling
211

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus pro 7450

Table of Contents