Epson Stylus Pro 7450 User Manual page 167

CUTTER ADJUSTMENT
You can adjust the paper cutting position when printing with a
top and bottom margin of zero. This function prints cutter
adjustment patterns and you can select the appropriate cutting
position from them.
REFRESH MARGIN
When you select ON, the printer cuts an extra print area after
borderless printing is used automatically.
AUTO NOZZLE CHECK
When you select ON, the printer performs a nozzle check before
printing, for each print job.
Note:
❏ Do not select ON if you are using non-Epson special media, or if the
width of paper you are using is less than 210 mm.
❏ This setting is available only when you select ON for AUTO
CLEANING.
AUTO CLEANING
When you select ON and perform a nozzle check from the printer
driver or the control panel, the printer not only checks for clogged
nozzles, but also performs head cleaning automatically.
Note:
Do not select ON if you are using non-Epson special media, or if the width
of paper you are using is less than 210 mm.
QUIET CUT
When you select ON, the printer cuts the printout slowly to
decrease the cutting noise and paper particles.
The Control Panel
167