Epson Stylus Pro 7450 User Manual page 190

Paper thickness test pattern example:
11. Examine the printed pattern to determine which set of lines
are aligned (showing the smallest gap), and note the
corresponding number.
12. After the pattern is printed, THICKNESS NUMBER appears. Press
the Paper Feed d button or Paper Feed u button to select
the number noted in step 11, and then press the Enter
button to save the selected value.
13. Press the Paper Source l button.
14. Select CUT METHOD, and then press the Menu r button. Press
the Paper Feed d button or Paper Feed u button to select
STANDARD, THICK PAPER, SLOW, THICK PAPER, FAST, or THIN
PAPER, and then press the Enter
15. Press the Paper Source l button.
16. Select PAPER FEED ADJUST, and then press the Menu r button.
Press the Paper Feed d button or Paper Feed u button to
set the paper feed amount, and then press the Enter
17. Press the Paper Source l button.
18. Select DRYING TIME, and then press the Menu r button. Press
the Paper Feed d button or Paper Feed u button to select
the time in seconds, and then press the Enter
19. Press the Paper Source l button.
smallest gap
button.
button.
The Control Panel
button.
190