Epson Stylus Pro 7450 User Manual page 191

20. Select PAPER SUCTION, and then press the Menu r button.
Press the Paper Feed d button or Paper Feed u button to
select STANDARD, -1, -2, -3, or -4, and then press the Enter
button.
21. Press the Paper Source l button.
22. Select M/W ADJUSTMENT, and then press the Menu r button.
Press the Paper Feed d button or Paper Feed u button to
adjust MicroWeave. Increase the value to give priority to the
print speed, or decrease it to give priority to the print quality.
Press the Enter
Selecting the registered settings
To select the registered settings, follow the steps below.
1. Press the Menu r button to enter Menu mode.
2. Press the Paper Feed d button or Paper Feed u button to
display CUSTOM PAPER, and then press the Menu r button.
3. Press the Paper Feed d button or Paper Feed u button to
display PAPER NUMBER, and then press the Menu r button.
4. Press the Paper Feed d button or Paper Feed u button to
select the number registered that you want to use. If you select
STANDARD, the printer prints data according to the driver
settings. If you select No. X, the control panel settings override
the driver settings.
5. Press the Enter
selected appears on the LCD panel.
6. Press the Pause
button to save the selected value.
button. If you select No. X, the number you
button to exit Menu mode.
The Control Panel
191