Printing on thick paper (0.5 to 1.5 mm)
When you load thick cut sheets, such as cardboard, follow the
steps below.
Note:
❏ Do not load thick paper larger in size than B1 (728 × 1030 mm);
otherwise, paper jams may occur.
❏ Always load B1 (728 × 1030 mm) sized thick paper long edge first.
You may want to select the Landscape setting in your printer driver.
1. Set the paper basket forward as described in "When feeding
paper forward (Roll Paper Banner [1580 mm or more]; thick
[0.5 to 1.5 mm] cut sheet)" on page 237.
2. Make sure that the printer is on.
3. Press the Paper Source l button repeatedly until Sheet
appears.
4. Make sure that the Power light is not flashing, and then set
the paper lever to the released position. LEVER RELEASED.
LOAD PAPER appears on the LCD panel.
Paper Handling
234