Short Circuit Button (All Exc Models); Light Switch (All Exc Models); Turn Signal Switch (All Exc Models); Horn Button (All Exc Models) - KTM 400 EXC EU Owner's Manual

CONTROLS

Short circuit button (All EXC models)

5.6

Light switch (All EXC models)

5.7

Turn signal switch (All EXC models)

5.8

Horn button (All EXC models)

5.9

Emergency OFF switch (EXC AUS)

5.10
The short circuit button
Possible states
• Short circuit button
closed, and the engine can be started.
• Short circuit button
a running engine stops, and a non-running engine will not start.
500134-10
The light switch
Possible states
Light off – Light switch is turned to the right. In this position, the light
is switched off.
Low beam on – Light switch is in the central position. In this position,
the low beam and tail light are switched on.
High beam on – Light switch is turned to the left. In this position, the
high beam and the tail light are switched on.
500134-12
Turn signal switch
Possible states
Turn signal light off – Turn signal switch is in the central position.
Turn signal light, left, on – Turn signal switch turned to the left.
Turn signal light, right, on – Turn signal switch turned to the right.
500145-10
The horn button
Possible states
• Horn button
• Horn button
500134-11
The emergency OFF switch
Possible states
Ignition off – In this position, the ignition circuit is interrupted, a run-
ning engine stops, and a non-running engine will not start.
Ignition on – In this position, the ignition circuit is closed, and the
engine can be started.
500131-10
is fitted on the left side of the handlebar.

in basic position – In this position, the ignition circuit is
pressed – In this position, the ignition circuit is interrupted,
is fitted on the left side of the handlebar.

is fitted on the left side of the handlebar.

is fitted on the left side of the handlebar.

in neutral position
pressed – The horn is operated in this position.
is fitted on the right side of the handlebar.

13