SERVICE WORK ON THE CHASSIS
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
400339-10
–
Fill bleeding syringe
Bleed syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
–
On the slave cylinder, remove bleeder screw
500158-10
–
Inject the liquid into the system until it escapes from bore hole
cylinder without bubbles.
–
To prevent overflow, drain fluid occasionally from the master cylinder reservoir.
–
Remove the bleeding syringe. Mount and tighten screws bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level under top level of container
–
Position the cover with the membrane. Mount and tighten the screws.
400340-10
Info
Clean up overflowed or spilt fluid immediately with water.
.
with membrane
.
with the appropriate hydraulic fluid.
p. 113)
4 mm (0.16 in)
and mount bleeding syringe
of the master
63
.