AVM Fritz!Box Fon WLAN 7050 Installation, Configuration And Operation page 93

Using FRITZ!Box Fon WLAN Features on the Analog Line
D
O
R2
Using FRITZ!Box Fon WLAN Features on the An-
alog Line
When FRITZ!Box Fon WLAN is connected to an analog line, a
feature can be activated directly at the switching station only
if the line is set for this kind of configuration.
N
sr
<feature>
Call Forwarding (Call Diversion via the Central
Exchange)
Call forwarding is performed by the ISDN operator's switch-
ing station. To use call forwarding, FRITZ!Box Fon WLAN must
be connected to an ISDN line. Then this feature can be used
to forward calls to an external line. Call forwarding is subject
to charges by the network provider and cannot be used for
forwarding calls to an Internet number.
FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone
Now all three participants can confer together. If
either of the other two parties hangs up, your
connection with the remaining participant re-
mains active.
You can end the three-party call by hanging up
the handset.
You can also switch from the three-party call back
to the original two-party connection. Dial the se-
quence shown at left. This ends the three-party
conference. The connection that was active last
before your initiated the three-party conference is
now active again. The other call is on hold. You
can alternate between the two connections by di-
aling the same sequence again.
Pick up the handset.
Dial the sequence shown at left.
Next enter the keyboard shortcut your net-
work provider has defined for the desired
feature. The given keyboard shortcut must
be obtained from your network provider.
93