AVM Fritz!Box Fon WLAN 7050 Installation, Configuration And Operation page 82

Alternating Between Calls
82 FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone
Alternating Between Calls
Whenever you have an active call 1 and one call 2 on hold,
you can switch from one call to the other as often as you
want using the Hold button.
To alternate between two connections, proceed as follows:
Call 1 You are talking to Caller 1.
P
R
Press the Hold button. Call 1 is now on hold.
M
To dial a second call, simply dial either the desired
extension number or the outside line access "0" fol-
lowed by the desired external number.
Call 2 If the call is answered, you can consult with caller 2
on this line. Call 1 is still on hold.
P
R2
To switch back from Call 2 to Call 1, dial the se-
quence shown at left.
Call 1 Call 1 is now active again and Call 2 is on hold.
P
R2
To switch back again from Call 2 to Call 1, dial the
same sequence. In this way you can alternate be-
tween Call 1 and 2.
The alternating connections can be ended in a number of
ways:
O
The caller on hold hangs up. You can continue talking
on the active connection.
R1
You end the active connection by dialing the se-
quence shown at left. The call that was on hold is
now active again.
O
You can also return to the call on hold by hanging up
the handset: this ends the currently active connec-
K
tion. In this case the phone rings as soon as you
hang up. Pick up the handset again to return to the
Call
last call that was on hold.
P