AVM Fritz!Box Fon WLAN 7050 Installation, Configuration And Operation page 105

Explicit Call Transfer from a Three-party Conference Call
N
M
R
M
R3
D
R2
R4
O
FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone 105
Pick up the handset.
Dial the external number of the first party. Talk.
Press the Hold button.
To dial a second call, simply dial either the de-
sired extension number or the outside line access
"0" followed by the desired external number. You
can now talk to the second subscriber while your
first call is on hold.
Dial the sequence shown at left to begin a three-
party conference call.
Now all three participants can confer together. If
either of the other two parties hangs up, your
connection with the remaining participant re-
mains active.
To clear your connections while allowing the ex-
ternal parties to continue the call, connect the
parties with each other.
You can also switch from the three-party call back
to the original two-party connection. Dial the se-
quence shown at left. This ends the three-party
conference. The connection that was active last
before your initiated the three-party conference is
now active again. The second external call is on
hold. You can alternate between the two connec-
tions by dialing the same sequence again.
Dial the sequence shown at left. The connection
on hold and the active connection are connected
with each other. The external parties continue the
call while you clear the connection.
Hang up the handset.
Explicit Call Transfer (ECT)