Guidebook; Linking Up The Cable Network; Dhcp Server - AVM Fritz!Box Fon WLAN 7050 Installation, Configuration And Operation

Dsl/wlan
Table of Contents

Advertisement

Guidebook

7
Guidebook

7.1 Linking up the Cable Network

7.2 DHCP Server

60
FRITZ!Box Fon WLAN 7050 – 7 Guidebook
The guidebook contains detailed instructions on the follow-
ing subjects:
Linking up the cable network
DHCP server
If you would like to use both LAN ports on FRITZ!Box Fon
WLAN, you will need an additional LAN cable. LAN cables can
be purchased at any computer electronics outlet.
Extending the length of the FRITZ!Box Fon WLAN cables is no
problem. Cables of the length needed can be obtained from
a computer electronics outlet. Remember that the quality of
the line may be decrease as the distance from the central
switching station increases.
Follow the instructions below when purchasing extension ca-
bles:
Maximum Length Cable Properties
Network cable 100 m
DSL cable
20 m
USB cable
3 m
Analog or
10 m
ISDN cable
FRITZ!Box Fon WLAN is equipped with its own DHCP server. In
the factory settings, the DHCP server and the setting "All
computers are located in the same IP network" are enabled
by default. Every time a computer connected with FRITZ!Box
Fon WLAN is restarted, it is assigned an IP address by the
DHCP server.
10bT network cable, 1.1 wired,
STP
10bT network cable, 1.1 wired,
UTP

Advertisement

Table of Contents
loading

Table of Contents