Call Waiting - AVM Fritz!Box Fon WLAN 7050 Installation, Configuration And Operation

Enabling Connected Line Identification Presentation
Permanently
To permanently enable transmission of the connected line's
number (COLP), proceed as follows:
N
r53
Ext.
r91ss
O

Call Waiting

Enable the "Call Waiting" feature to be notified during a call
if a second caller is dialing your line. An acoustic signal in
your telephone handset notifies you that a second call is
waiting. You can accept the connection with the new caller
within 30 seconds. If you ignore the signal, the waiting call is
rejected after 30 seconds.
For instructions on how to turn the "Call Waiting" function on
and off, see the section "Call Waiting Option" on page 87.
R2
R1
R0
FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone 103
Pick up the handset.
s0s
Dial the sequence shown at left to
enable transmission of the connect-
ed line number. Type in the number
of the extension in the "Ext." field.
Save your settings if desired by dial-
ing the sequence shown at left.
Hang up the handset.
To accept a waiting call, dial the sequence shown at
left. Your original call is now on hold.
To return to your original connection, dial the se-
quence shown at left.
You can also accept to the waiting call by hanging up
your existing connection, i.e., by hanging up the hand-
set. In this case the phone rings as soon as you have
hung up. Pick up the handset again to accept the wait-
ing call.
To reject a waiting call, dial the sequence shown at left.
Call Waiting