AVM Fritz!Box Fon WLAN 7050 Installation, Configuration And Operation page 87

Disabling Automatic Outside Dialing
N
r1 s0s
Ext.
r91ss
O
Call Waiting Option
Call waiting can be switched on or off for each extension.
Some older terminal equipment connected to extensions
may misinterpret the call waiting signal. This is especially
true of fax machines and modems. If communication errors
occur, you should disable call waiting for fax and modem ex-
tensions.
See section "Call Waiting" on page 103 for information about
how to accept a call while another connection is active.
When "Call Waiting" is enabled, modem and fax connections
may be interrupted.
Disabling Call Waiting
N
r2 s1s
Ext.
r91ss
O
Enabling Call Waiting
N
r2 s0s
Ext.
r91ss
O
FRITZ!Box Fon WLAN 7050 – 10 Configuration and Operation by Telephone
Call Waiting Option
Pick up the handset.
Dial the sequence shown at left.
Save your settings if desired by dial-
ing the sequence shown at left.
Hang up the handset.
Pick up the handset.
Dial the sequence shown at left.
Save your settings if desired by dial-
ing the sequence shown at left.
Hang up the handset.
Pick up the handset.
Dial the sequence shown at left.
Save your settings if desired by dial-
ing the sequence shown at left.
Hang up the handset.
87