Table of Contents
Advertisement
2.3 Connecting FRITZ!Box Fon WLAN to DSL
FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation
Connecting FRITZ!Box Fon WLAN to the power supply
4.
The green "Power" LED begins flashing after a few sec-
onds.
Perform the following steps to connect FRITZ!Box Fon WLAN
to DSL:
1.
Remove the enclosed DSL cable (gray) from the package.
2.
Connect one end of the cable to the socket labeled
"DSL", located at the far left of the back panel of
FRITZ!Box Fon WLAN.
3.
Then connect the other end of the cable to the socket
on the DSL splitter labeled "DSL". If the DSL line cable
does not fit in the splitter, insert the cable into the gray
RJ45-RJ11 adapter enclosed in the package and then
plug the adapter into the splitter socket.
Connecting FRITZ!Box Fon WLAN to DSL
15
Advertisement
Table of Contents
