Table of Contents
Advertisement
Connecting FRITZ!Box Fon WLAN with the WLAN Adapter of a Computer
30
FRITZ!Box Fon WLAN 7050 – 2 Starting FRITZ!Box Fon WLAN 7050 Operation
Entering the WLAN network key
The WLAN connection is set up.
If problems occur in setting up the WLAN connection,
check your WLAN settings as described in the section
"WLAN Connection Is Not Established" from page 73.
7.
Now read the information in section "Opening the User
Interface" on page 37 and follow the security instruc-
tions in the section "Security" on page 59.
Setting up a WLAN Connection Using the Manufacturer's
User Interface
Not all settings described below appear in every manufac-
turer's user interface. Some settings are configured auto-
matically by certain manufacturers.
1.
Select the SSID (WLAN radio network) "FRITZ!Box Fon
WLAN 7050" in the user interface.
If the radio network is not displayed, follow the instruc-
tions in the section "The Radio Network Is Not Dis-
played" from page 72.
2.
Set "Infrastructure" as the network mode.
3.
Select "128 bit" or "WEP 128 bit" encryption.
4.
Set "Open Key" as the type of encryption or registration.
5.
Enter the preset key in the "Key 1" field. Be sure to enter
the key in the desired format, ASCII or hexadecimal. The
key is printed on the sticker on the base of the device
and on the cover of the FRITZ!Box Fon WLAN CD. The key
is printed in both formats.
Advertisement
Table of Contents
