Table of Contents
Advertisement
The computers can receive their IP addresses from the DHCP
server only if the setting "Obtain an IP address automatical-
ly" is enabled in the their IP settings. For more information,
see the section "IP Settings" from page 75.)
Only one DHCP server may be active within any network.
DHCP Server Settings in the User Interface
Proceed as follows to open the DHCP server settings:
1.
Make sure that the setting "Show expert settings" is en-
abled on the "Expert Mode" page ("System / Expert
Mode").
2.
Open the menu "System / Network Settings" in the
FRITZ!Box Fon WLAN user interface.
3.
Click the "IP Addresses" button.
The "IP Settings" page is opened. Here you can make
the settings for the DHCP server.
IP Networks
The settings "All computers are located in the same IP net-
work" specifies whether all of the computers connected with
FRITZ!Box Fon WLAN are located in the same IP network or in
different IP networks.
"All computers are located in the same IP network" Is
Enabled
The IP network of FRITZ!Box Fon WLAN is specified by
the settings "IP address" and "Subnet mask". The ad-
dress registered in the "IP address" field is the IP ad-
dress of FRITZ!Box Fon WLAN. FRITZ!Box Fon WLAN can
be reached at this address in the IP network. The IP ad-
dress preset upon delivery is 192.168.178.1.
DHCP Server Settings in the User Interface
FRITZ!Box Fon WLAN 7050 – 7 Guidebook
61
Advertisement
Table of Contents
