Staple Sorting; Setting Staple Sort Mode - Toshiba e-STUDIO3511 Operator's Manual

4.SELECTING FINISHING MODES (Cont.)

Staple Sorting

When the finisher (optional) is installed, you can perform automatic stapling for every set. 3 staple positions
can be selected when installing saddle-stitch finisher (MJ-1024) or multi-staple finisher (MJ-1023).
* The paper weight should be in the range of 64-105 g/m
staple finisher (MJ-1023), and 64-80 g/m
OHP films or labels is excluded.
* Stapling will not work when copied paper of different widths are mixed.
3
- Example of selecting the [FRONT STAPLE-1] button

Setting Staple Sort Mode

Place paper in the drawer(s).
1
- "1.SETTING COPY PAPER"
- When using this mode in bypass copying ("Bypass Copying"
Page 59), be sure to specify the paper size.
2 Place the original(s).
- "2.SETTING ORIGINALS"
3 Press the Finisher button on the basic
menu as shown in the illustration on the
right (highlighted).
80
3.SETTING OF BASIC COPY MODES
2
for the saddle-stitch finisher (MJ-1024) or multi-
2
for the single-staple finisher (MJ-1022). Special paper such as
Page 36
Page 45
AB